Home About us Products Feedback Contact us  
ELECTROMAGNETIC ROUND CHUCK IS : 8710 - 1978
   
Electromagnetic Round Chuck

Features:-

  • Work holding device for Rotary surface grinding machine &
    lathe machines.
  • Each pole is having separate coil, as such very strong & even magnetic flux is generated.
  • Magnetic pull is 30-50% more then IS specification.
  • Mag - D - Mag with variable control unit allows to neutralize the residual magnetism precisely , using a microprocessor based control circuitry.
  • Variable supply for varying power which helps in alignment & removing of warpages of thin jobs.
  • The chuck is also useful for second operation
  • Chuck is tested for Slippering force, Waterproof test, Temperature rise test, Electrical & Demagnetizing tests.

Specifications:-

Code No.

Size (mm)
Circular Pole Gap (mm)
UC 2434
Ø 300 X 100 H
10 + 4
UC 2435
Ø 450 X 100 H
10 + 4
UC 2436
Ø 600 X 100 H
10 + 4
UC 2437
Ø 750 X 100 H
10 + 4
UC 2438
Ø 1000 X 100 H
10 + 4
UC 2439
"ULTRA" MAG D-MAG WITH VARIABLE CONTROL UNIT
2Amp.
UC 2440
"ULTRA" MAG D-MAG WITH VARIABLE CONTROL UNIT & BATTERY BACK-UP (20 minutes)
2Amp.
Top

ELECTROPERM MAGNETIC CHUCK For Grinding Machine
   
Electroperm Magnetic Chuck for Grinding Machine

Features:-

  • Work holding device for surface grinding machines.
  • COLD DEVICE as it doesn't require power continuously except for short period of activation & deactivation.
  • Parallelism & flatness is 0.010mm/300mm.
  • Economical for operation & maintenance.
  • Uniform clamping force all over surface.
  • No accidents due to power failure.
  • Slippering force is 2.5 Kg/cm2.
  • Vertical Lifting Force is 35 - 40 Kg/cm2.
  • Variable supply unit to vary power which helps in alignment & removing of warpages of thin jobs.
  • Chuck is tested for Slippering force, Waterproof test, Temperature rise test, Electrical & Demagnetizing tests.
  • We also manufacture Special chucks to suit individual requirement.

Specifications:-

Code No.

Size (mm)
Pole Gap (mm)
UC 2441
450 L x 150 W x 100 H
25
UC 2442
500 L x 200 W x 100 H
25
UC 2443
600 L x 200 W x 100 H
25
UC 2444
600 L x 250 W x 100 H
25
UC 2445
750 L x 250 W x 100 H
25
UC 2446
900 L x 250 W x 100 H
25
UC 2447
600 L x 300 W x 100 H
25
UC 2448
750 L x 300 W x 100 H
25
UC 2449
900 L x 300 W x 100 H
25
UC 2450
1000 L x 250 W x 110 H
25
UC 2451
1000 L x 300 W x 110 H
25
UC 2452
1500 L x 250 W x 110 H
25
UC 2453
1500 L x 300 W x 110 H
25
UC 2454
1500 L x 400 W x 110 H
25
UC 2455
"ULTRA" CONTROL UNIT WITH VARIABLE SUPPLY

FINE PITCH ELECTROPERM MAGNETIC CHUCK FOR GRINDING MACHINE
   
Fine Pitch Electromagnetic Magnetic Chuck for Grinding Machine

Features:-

  • Work holding device for surface grinding machines.
  • COLD DEVICE as it doesn't require power continuously except for short period of activation & deactivation.
  • Parallelism & flatness is 0.010mm/300mm.
  • Suitable for thin & small jobs.
  • Economical for operation & maintenance.
  • Uniform clamping force all over surface.
  • Negligible power consumption.
  • No accidents due to power failure.
  • Slippering force is 2.5 Kg/cm2.
  • Vertical Lifting Force is 35 - 40 Kg/cm2.
  • Variable supply unit to vary power which helps in alignment & removing of warpages of thin jobs.
  • Chuck is tested for Slippering force, Waterproof test, Temperature rise test, Electrical & Demagnetizing tests.
  • Good quality & standard electrical accessories.
  • We also manufacture Special chucks to suit individual requirement.

Specifications:-

Code No.

Size (mm)
Pole Gap (mm)
UC 2456
450 L x 150 W x 100 H
4 + 1
UC 2457
500 L x 200 W x 100 H
4 + 1
UC 2458
600 L x 200 W x 100 H
4 + 1
UC 2459
600 L x 250 W x 100 H
4 + 1
UC 2460
750 L x 250 W x 100 H
4 + 1
UC 2461
900 L x 250 W x 100 H
4 + 1
UC 2462
600 L x 300 W x 100 H
4 + 1
UC 2463
750 L x 300 W x 100 H
4 + 1
UC 2464
900 L x 300 W x 100 H
4 + 1
UC 2465
1000 L x 250 W x 110 H
4 + 1
UC 2466
1000 L x 300 W x 110 H
4 + 1
UC 2467
1500 L x 250 W x 110 H
4 + 1
UC 2468
1500 L x 300 W x 110 H
4 + 1
UC 2469
1500 L x 400 W x 110 H
4 + 1
UC 2470
"ULTRA" CONTROL UNIT WITH VARIABLE SUPPLY

  Home About us Products Feedback Contact us