| MAGNETIC PLATEN |
| |
|
|
|
Introduction:
Ultra Magnetic Platen used for very fast, safe
& easy clamping of moulds on Injection moulding
machine. This advanced technology eliminates hydraulic
& mechanical clamping system & provides
quick mould change (QMC) and just in time (JIT)moulding.
|
|
|
| |
|
Operating Principal
|
| Magnetic Platen works on the ELECTRO PERMANENT
MAGNETIC SYSTEM that develops very high magnetic force. The
electrical control equipment is only to activate & de-activate
the magnets inside the platen i.e. it will not loose it's magnetic
power in case of power failure. It doesn't requires power once
it is magnetized. |
| |
|
Operation
|
| To mount a mould, the operator has to match the
mould base to the locator ring on stationery platen, then bring
the moving platen in until it touches the rear mould plate.
Now, the operator has to magnetize the mould, remove the straps
holding the mould halves together and then pull the moving platen
back. The machine and mould are now ready for production. |
Atypical magnetic mould change involves
bringing both mould halves together, securing the mould halves;
demagnetizing the platen & then lifting the mould out of
the press by suitable means. |
| |
|
Salient Features
|
|
Universal :
- Compatibility with all existing machines
- Full utilization of active area of the platen
- Maintenance Free
|
Reliable :
- Total demagnetization of moulds & plates
when switched off.
- No deformation
- Fast Clamping
|
|
Saving:
- Drastic reduction of downtime
- Virtually zero operating cost, no power consumption
- Very fast return of investment
|
Safe:
- Working on ELECTRO PERMANENT MAGNETIC SYSTEM
- Uniform clamping force across the entire rear
of mould
- Uniform magnetic field.
|
|
|
Code
No.
|
Size (mm)
|
Max.
Working Temp ( C)
|
Clamping
Force (Kg/Cm)
|
Thickness
|
|
UC
2510
|
Depends
on Machine Platen Size
|
0
- 130
|
25
- 30
|
60
- 65 MM
|
|
UC
2511
|
Depends
on Machine Platen Size
|
130
- 240
|
25
- 30
|
60
- 65 MM
|
|
"ULTRA"
CONTROL UNIT FOR ABOVE MAGNETIC PLATEN
|
|
| Top |
|
|
|
