Back Plates, Mounting Flanges, Extra Light Duty 4 Jaw Independent Chucks

BACK PLATES / MOUNTING FLANGES

Model	Suitable for	Sizes /Product Code
Model	Suitable for	160mm	200mm	250mm	315mm
L1	LB-17/20/25 (HMT) H-22/26 (HMT) A-124-124 (PSG)	5013-160	5013-200	5013-250	5013-315
A2-4 A2-6 A2-8	Turnmaster-35 (Kirloskar), EP -380 (Kirloskar) Turnmaster-40/45 (Kirioskar), NH -22/26,NL 22/26 (HMT),LMT-20,L2-22 TP/LT-20 (HMT), 9B/VIKRAM,A24UP(HMT) Turnmaster-50 (kirlokar) BECO	5017-160 - -	5017-200 5019-200 5020-200	5017-250 5019-250 5020-250	5017-315 5019-315 5020-315
D1-4 DI-6 DI-8 D1-11	Turnmaster-35/Nagmati-175,EP-1330/1550/335 (Kirloskar) Turnmaster-40/45,EP-1675/400/425 (Kirloskar), VIKRAM (HMT) Turnmaster-50,ep-1810/450/500 (Kirloskar) B-32(HMT) EP-2210/2215/2615 (Kirloskar),L-45 (HMT)	5026-160 - - -	5026-200 5028-200 5029-200 5030-200	5026-250 5028-250 5029-250 5030-250	- 5028-315 5029-315 5030-315

Top

EXTRA LIGHT DUTY 4-JAW INDEPENDENT CHUCKS

Extra Light Duty Chucks refferred as ELD, have been designed specially for use on small precision machines which are light in weight and where chuck weight is critical for the machine. The bodies of 80mm and 100mm chucks are made out of steel and 100mm from SG Iron. This property of being light weight helps to retain the precision of the bearings of the machine for long time.The vibrations are redused to the minimum. Used within the capacity, these chucks are sturdy and reliable. Operating Key, Mount Bolts, Allen Key, Tap & Inspection Report is provided with each chuck.

SIZE	A	B	C	D	E	F	G	H	J	K	L	N	WEIGHT IN KGS (APPROX.)
3"	82	35	19	16	12	.35	60	70	2.5	M6	100	5	1.5
4"	101	35	25.4	16	12	35	76.2	88.9	2.5	M8	115	5	2
5"	130	45	25.4	20	15.7	51	60	70	3	M8	165	7	3.5
6"	152	45	40	20	15.7	51	69.8	82.5	3	M8	165	7	4.5
8"	203	50	45	24	19	63	82.5	95.25	3.5	M10	215	7.5	8.5
10"	254	69	50	29	25.4	83	111	127	5	M10	265	9	18.8

Top

Back